I.Technical Specifications:
SPECContent | Conductive Type Belt Conveyor |
Basic Dimensions For Installation | |
Powder Booth Size | 1100×920×1000mm（Length×Width×Hight） |
Max. Outline Dimensions | 2250×1000×2100mm（Length×Width×Hight） |
Effective Width Of The Belt | 600mm（Actual Width 700mm） |
Conveyor Frame Size | 2250×1000×880mm（Length×Width×Hight） |
Workpiece Minimum Length | 50mm |
Workpiece Placed Way | Friction Surface Facing Down |
Powder Booth Structure | |
Structural Style | Assembled By The Powder Booth, Gun Gear And Housing, The Conductive Belt Drive Mechanism At The Bottom Of The Pipe Rack, Clear Powder Boxes From Several Independent Units; It Is More Convenient For Repair And Maintenance. |
Body Shell | Cold Rolled Q235 Steel After Anti-Rust Treatment, Spraying Acrylic Paint Dry. |
Conductive Skeleton Belt Transmission Mechanism | Using 60*60 Aluminum Alloy Sections、Adapting Piece And12mmSteel Plate Assembled |
Underbed | Using Q235 Square Tube Cleaning Rust After Processing，Acrylic Dry Painting, Chrome Plated Adjust A Foot |
Roller Structure | Active Roller, Passive Roller Belt Use Special And Partial Knurling, And Tapered Roller Structure |
Conductive Belt Conveying System | |
Power Supply | Single Phase 220V |
Drawbar Power | 120W (Speed Is Adjustable) |
Driving Motor | Single-Phase Speed Regulating Motor |
Conveyor Belt | Conductive Rubber Belt |
Belt Size | 700×4300mm（Width Length）Expand The Length Of The Long Finger |
The Belt Core Layer | Breaking Strength×Number Of Plies90×2 N/Mm |
The Thickness Of The Belt | 3.0 Mm |
Joint Type | Conductive Rubber, Hot Glue Joint |
Accessory | To Increase The Electrical Conductivity, Powder Spraying Period Of Conductive Belt Bottom Is Equipped With Stainless Steel Plate |
Conductive Belt Under The Clear Powder Charge Part | |
Power Supply | Single Phase 220V |
Transmission Power | 90W（Speed Is Adjustable） |
Brush Roller | Rotate Speed 500r/Min ， Motor V-Belt Transmission |
Collect Powder Box | Match At The Bottom Of The Fluidized Plate With A Φ 75 Recycling Powder Tube, The Electric Brush Roller Is Installed On The Top Of The Closed Powder Box, The Bottom Of The Box Body Is Equipped With Four M14 Adjust A Foot, The Entire Closed Powder Box Independent Institutions Can Move Independently |
Spray Gun Transmission Main Configuration | |
Linear Guide Way | Rod Diameter 25mm，Effective Stroke 700mm （The Rolling Stones In Taiwan） |
Driving Motor | Single-Phase Speed Regulating Motor （Change The Direction Of The Movement Of The Gun By Slider, Motor Has Been Unidirectional Rotation） |
Motor Power | Single Phase 220V 120W（Speed Is Adjustable） |
Transmission Model | With Closed Slides As A Guide And Three Precision Short Pitch Chain Drive Back And Forth |
II.Machine Photos:
Brake Pad Powder Painting Line Is Used For Painting The Backing Plate Automaticlly, It Is Also Equipped With Heating And Cooling Tunnels, Very High Efficient And Premium Quality.